Walton olvio mh18 6531e flash file without password

Walton MH18 Price in Bangladesh

walton olvio mh18

Walton Olvio MH18 is a budget-friendly feature phone that runs on the MTK6261D chipset. Like any other electronic device, it may encounter software issues that require flashing the firmware. In this article, we will discuss how to flash Walton Olvio MH18 and install the firmware.

Before proceeding, it is important to note that flashing the firmware will erase all data from your phone. Therefore, it is advisable to back up all important files and contacts before starting the process. Also, make sure your phone’s battery is charged to at least 50% to avoid interruptions during the flashing process.

Here are the steps to flash Walton Olvio MH18:

Step 1: Download the Firmware
The first step is to download the firmware file for your Walton Olvio MH18 model. You can find the firmware file from reliable sources online or the official Walton website. Save the file on your computer and extract it using a zip file extractor.

Step 2: Download the Flash Tool
Next, you need to download and install the MTK Flash tool on your computer. The MTK Flash tool is a software program used to flash firmware files on MediaTek-powered devices like the Walton Olvio MH18. You can download it from reliable sources online.

Step 3: Install the USB Driver
Now you need to install the USB driver for your Walton Olvio MH18 on your computer. The USB driver allows the MTK Flash tool to communicate with your device. You can download the USB driver from the official Walton website or reliable sources online.

Step 4: Connect Your Phone
Once you have downloaded and installed the MTK Flash tool and USB driver, connect your Walton Olvio MH18 to your computer using a USB cable. Make sure your phone is turned off.

Step 5: Launch the MTK Flash Tool
Now open the MTK Flash tool on your computer and select the scatter file from the extracted firmware folder. The scatter file is a text file that contains information about the firmware and tells the MTK Flash tool how to flash it.

Step 6: Start Flashing
After selecting the scatter file, click on the Download button on the MTK Flash tool. The flashing process will begin, and you will see a progress bar on your screen. Wait for the process to complete. It may take a few minutes, so be patient and do not interrupt the process.

Step 7: Disconnect Your Phone
Once the flashing process is complete, disconnect your Walton Olvio MH18 from your computer and turn it on. The phone will take a few minutes to boot up as it installs the new firmware.

Congratulations! You have successfully flashed the firmware on your Walton Olvio MH18.

In conclusion, flashing the firmware on your Walton Olvio MH18 is an easy process if you follow the above steps carefully. It is advisable to use a reliable source to download the firmware and MTK Flash tool to avoid damaging your device. Always remember to back up your data before starting the process.

We exchanged some important information – Walton olvio mh18

Being the model’s name Walton olvio mh18.I have done very little file size 3.54 MB., Use any button on the boot key sus as

,1 ,v-,v+ and etc. Did you know that this file is official? CPU used spd 6531e. Flash with the boxes cm2scr and miracle

crack 2.82. We provide the files completely free. Upload to Google Drive so you can easily download. thanks

Password: gsmmobiletech

1 Comment

Leave a Reply

Your email address will not be published. Required fields are marked *